The plumbing system is one of the most important systems of a house. It supplies and distributes water throughout your home via different plumbing fixtures like faucets, water heaters, washers, hose bibs, taps, toilets etc. As such, your lifestyle is even more disturbed more than expected, when any of these fixtures in your house is not working properly. This is why grave attention is given to plumbing and sewer system designs when a new home is being built.
In this regard, whether you are buying a new home or are renting one, be sure to check that the plumbing is working properly. For rentals, plumbing repairs are often done by the landlord under various terms relating to tenant repair and maintenance.
However, whether you own a house, or are living in one on rent, in order to maintain the drainage and sewer systems, you need to monitor a few things routinely. Failure to do so may result in many problems that arise at a later stage, but require more time and money.
It is also important to know that most of these problems result from ignorance or negligence and that you can easily keep these problems away by following a few simple instructions that experts at the Mesa Plumbing Company have compiled to serve as a handy checklist.
Check for Leaky Faucets
A few drips cause a lot of trouble if left unattended. Water leaks waste your water up to thousands of gallons a year, they can cost you hundreds of dollars if the leakage is the result of a blocked piping system, and they can spoil your environment by inviting pests, fungi, and bad odor into your abode.
In order to keep these problems away, it is required that you inspect your taps and pipes on a monthly basis. Leaky faucets are easier to detect and the repair is a DIY task most of the time. However, if the piping is leaking inside the wall; you may need professional help.
Check for a Slow Drain
Beware if your drains are working slower than usual. If you notice a slow drain; then follow the next steps:
- Clean the P-trap which might reduce the problem or even end it.
- Use drain cleaners and some home remedies to help you in this regard.
- If you still see the drain becoming slower each day; then contact professional plumbers.
Keep a Check on Your Toilets
According to a study, 45% of the water used in an American house is consumed in the restrooms, in which 27% is used by the toilets. Fortunately enough, you can curb the amount of water used by toilets by keeping them maintained.
- Check the toilet’s leaking flappers and try to change them once a year even if they function properly.
- Keep a check at the base of the toilet so see if it’s wet or dry.
- The valves can create a great mess if they are not functioning properly and not properly flushing the water in the toilet bowl.
Check All Angle Stop Valves
Angle stop valves are located under all plumbing fixtures of your home for hot and cold water. They are specially designed to shut off the water in case of an emergency or repair. It is important to determine that these stop valves are working properly and are not displaying any signs of leakage, non-functionality, or wear.
Check Your Water Heater
It is recommended that you check your water heater functionality once a year because it consumes a lot of energy and water. Make sure that your heater is drained annually and checked for leaks and working of the T&P valve.
To avoid all these inspections, you can schedule them regularly with professional plumbing services in Gilbert, Tempe, Fountain hills, Scottsdale, Mesa, San Tan, or Chandler. Simply contact the Mesa Plumbing Company and along with the inspection, you’ll get a free estimate for any necessary repairs too!